Intermec CN2 User Manual page 19

You must use only the Intermec power supply approved
for use with the CN2. Using any other power supply will
damage the CN2.
Attention: Vous devez utiliser seulement le bloc
d'alimentation Intermec désigné pour le CN2.
L'utilisation d'autre blocs d'alimentation endommagera le
CN2.
Note: For help installing and using the communications
dock, see the CN2 Communications Dock Quick Start Guide
(P/N 930-061-001), which shipped with the dock.
6 Connect the power cord to an AC power outlet. The green
Power light on the communications dock turns on.
7 Place the CN2 in the communications dock. The battery is
fully charged in approximately 4 hours.
CN2 Handheld Computer User's Manual
Chapter 1 — Using the CN2 Handheld Computer
AC power
supply
Communications
dock
Power
light
7