Intermec CN2 User Manual page 77

11 (Optional) Tap the Call Options tab and make changes if
necessary.
12 Tap OK at the top of the screen to return to the Modem
screen.
13 If you changed the baud rate in Step 10, a message box
appears. Tap OK to close the message box.
14 Tap TCP/IP Settings only if your ISP does not use a
dynamically assigned IP address. When you are done making
selections, tap OK at the top of the screen to return to the
Modem screen.
15 Tap Security Settings to configure advanced security
settings, if necessary. When you are done making selections,
tap OK at the top of the screen to return to the Modem
screen.
CN2 Handheld Computer User's Manual
Chapter 3 — Adding the CN2 to the Network
65