Default Configuration - Intermec CN2 User Manual

Appendix B — Default Configuration

Default Configuration

Use the following tables to see the default configuration settings
of the CN2. If you restore the CN2 to factory default settings, it
will use these values. The tables are organized according to the
options in Intermec Settings.
Default Scanner Configuration
Symbology
Codabar
Code 39
Code 128
Interleaved 2 of 5
MSI
UPC/EAN
Symbology Options
Preamble
Postamble
Global Symbology ID
Virtual Wedge Settings
Virtual Wedge Enable
Grid
108
Default Value
Disabled
Enabled
Enabled
Disabled
Enabled
Enabled
Default Value
No characters (disabled)
No characters (disabled)
Disable
Default Value
Enable
Null
CN2 Handheld Computer User's Manual