2 Remove the battery door and set it aside.
3 Insert the stylus between the battery and the CN2 case, and
press straight down until the battery is released.
4 Lift the battery out of the battery compartment.
Maximizing Battery Life
There are several things that you can do to maximize the life of
your fully charged battery.
• Set the Backlight Timeout to 10 seconds.
• Verify that Radio Power Management is enabled (Fast PSP).
Enabling radio power management allows your radio to
switch between awake and sleep modes based on network
traffic.
• Verify that each setting under Power Management has a value
of 1 minute for a combined automatic shutoff time of 3
minutes.
You can use Intermec Settings to easily make all of these
configuration changes. For help, see "Configuring the CN2
Locally With Intermec Settings" on page 32.
Checking the Battery Status
The easiest way to tell the status of your battery is to look at the
battery icon on the taskbar of your CN2. For help locating the
taskbar, see the illustration on page 14.
CN2 Handheld Computer User's Manual
Chapter 1 — Using the CN2 Handheld Computer
9