Using Intermec Settings Remotely With Smartsystems Foundation - Intermec CN4 User Manual

Using Intermec Settings Remotely With SmartSystems
Foundation
CN4 Mobile Computer User's Manual
computers and peripherals. For more information, see the next
section.
• Directly on the CN4. Using Intermec Settings on the CN4 changes
only the settings on that computer. For more information, see
"Using Intermec Settings Directly On the CN4" on page 50.
• You can use a third-party device management product that
includes Intermec Settings Configuration Support, such as the
Microsoft System Center Mobile Device Manager.
Visit http://www.microsoft.com/systemcenter/mobile
more information.
You can also configure the CN4 with configuration bundles that you
create using SmartSystems Foundation. For more information, see
the SmartSystems Foundation online Help.
Your CN4 is SmartSystems-enabled, which lets you open Intermec
Settings from the SmartSystems console to remotely configure all of
your CN4 computers.
For more information on SmartSystems, see
With SmartSystems Foundation" on page 44.
To open Intermec Settings from the SmartSystems console
1 In the SmartSystems console, right-click a CN4.
2 Select Intermec Settings.
Chapter 2 — Connecting and Configuring the CN4
for
"Managing the CN4
49