Intermec CN2 User Manual page 53

To use wireless communications in a TCP/IP network
1 Configure these network parameters on each CN2 in the
network:
• Infrastructure mode (set to Infrastructure by default)
• Network name (SSID)
• Host IP address
• IP settings (if not using DHCP)
2 Configure security. For help, see "Configuring Network
Security" on page 45.
The easiest way to configure the network parameters on the
CN2 is to use Intermec Settings. For help, see "Configuring the
CN2 Locally With Intermec Settings" on page 32.
CN2 Handheld Computer User's Manual
Chapter 3 — Adding the CN2 to the Network
41