Configuring 802.1X Security With Microsoft Security - Intermec CN2 User Manual

If you choose TLS:
a For Validate Server Certificate, choose Enabled and tap
b You can also enter a User Name, Subject Name and
9 Exit Intermec Settings.

Configuring 802.1x Security With Microsoft Security

1 Make sure you have configured the communications and
radio parameters on your CN2.
2 If you plan to use TLS for authentication, load a user and
root certificate on your CN2. For help, see "Loading
Certificates" on page 59.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Security
Settings > Microsoft Security.
5 For Infrastructure Mode, choose Infrastructure.
6 For Network Authentication, choose Open.
7 For Data Encryption, choose WEP.
8 For 802.1X Authentication, choose TLS or PEAP, and tap
Save.
If you choose TLS:
a Select Properties and tap Run App. The Authentication
b From the Authentication Settings box, tap Select.
c Select your certificate from the list and tap Save.
CN2 Handheld Computer User's Manual
Chapter 3 — Adding the CN2 to the Network
Save.
Server Common Name if you want to increase your level
of security.
Settings box appears.
55