Installing Applications Using Activesync - Intermec CN2 User Manual

Chapter 4 — Developing and Installing Applications
Intermec recommends that you store your applications in a
folder specific to your application underneath the \PROGRAM
FILES folder.
Intermec recommends that you store your application data in
one of these folders on the CN2:
Folder
SDMMC Disk
DiskOnChip
There are several ways you can install files and applications on
the CN2:
• ActiveSync
• SD Card
• Wavelink Avalanche
The following sections explain how to use each one of these
processes to install your application on the CN2.

Installing Applications Using ActiveSync

You can use ActiveSync to establish a connection between your
PC and the CN2. ActiveSync allows you to transfer files,
synchronize files, perform remote debugging, and other device
management activities.
Note: ActiveSync is a free application available from the
Microsoft web site.
To establish a partnership between your PC and the CN2, you
need these items:
• USB interface cable (P/N 321-576-002)
• CN2 communications dock (P/N 225-696-001)
• ActiveSync version 3.7.1 or later
76
Description
The SDMMC Disk folder shows the contents of
the optional SD card. Intermec recommends that
you place application install files in this folder.
The DiskOnChip folder is an area of storage that is
part of the CN2 flash memory. This storage area is
not deleted during a cold boot.
CN2 Handheld Computer User's Manual