Saving Your Settings; Exiting Intermec Settings; Restoring The Cn2A Default Settings - Intermec CN2A User Manual

Saving Your Settings

Exiting Intermec Settings

Restoring the CN2A Default Settings

CN2A Mobile Computer User's Manual
You can save the changes you make in Intermec Settings at any
time. After you save your changes, you can continue making
changes or you can exit Intermec Settings.
To save your settings
• Tap the Save icon
Or,
• From the Main Menu, tap File > Save Settings.
When you are done modifying your device configuration and
have saved your settings, you should exit Intermec Settings.
To exit Intermec Settings
• Tap the X in the upper right corner of the window.
Or,
• From the Main Menu, tap File > Exit.
If you try to exit Intermec Settings without saving your changes,
a message box appears asking if you want to save your
configuration changes. Tap Yes.
You can restore the CN2A to factory default settings. For a
complete list of the default settings, see "Default Configuration"
on page 134.
Note: Restoring the CN2A to factory default settings resets all
network parameters. As a result, you may lose network
communications. This option should only be used by network
administrators or by Intermec support personnel.
To restore default settings
1 Tap Start > Intermec Settings. The Intermec Settings
application appears.
2 Tap one of the menus:
• Data Collection
Chapter 2 — Configuring the CN2A
at the top of the screen.
37