Intermec CN2 User Manual page 105

Summary of Intermec Diagnostic Tests (continued)
Test Name Description
2. Battery Information Displays the charge levels for the
main battery and the backup
battery. Also indicates if AC
power is detected.
3. Display Test Verifies that every pixel on the
CN2 screen is working properly.
4. Hardware Reads, verifies, and displays
Configuration information about hardware
configuration. Also displays the
version of the operating system
running on your CN2.
5. Memory Displays information about the
Information RAM, which is divided into
program memory and storage
memory.
6. Networking Test Displays your IP address and
validates your network
connection.
7. Audio Test Verifies that the audio sounds
are working correctly.
8. Touch Screen Test Verifies that the touch screen is
working correctly.
CN2 Handheld Computer User's Manual
Chapter 5 — Troubleshooting and Maintaining the CN2
Tips
Tap X to exit the test.
When each test action begins, a
message explains what you
should see on this test display.
Press Enter to dismiss the
message, and then press Enter
again when you finish
examining the test display.
You may be asked to provide
this information if you contact
Intermec Product Support.
Tap X to exit the test.
Tap X to exit the test.
Tap X to exit the test.
When the test begins, a message
directs you to draw on the
screen with the stylus. Tap X to
dismiss the message, and a white
screen appears for you to draw
on.
When you finish drawing, press
any key to exit.
93