01: Buffer Size; 07: Print Case - Intermec EasyCoder 4630 User Manual

4630 and 4830 Coax/Twinax Interface Card User's Manual

01: Buffer Size

Purpose: Selects the default logical buffer size.
Syntax: Z01,n
n =
1 960 characters
2 1920 characters
3 2560 characters
4 3440 characters
5 3564 characters (default)
Example: &%Z01,3
Sets the logical buffer size to 2560 characters.
Notes: This command, along with command 99, changes the
logical buffer size selection in the nonvolitile memory
of the interface. The logical buffer size is only
reported to the host the next time the unit is turned
on. The physical buffer size is permanently set at 4K.

07: Print Case

Purpose: Selects the default print case.
Syntax: Z07,n
n =
0 Mono case
1 Dual case (default)
Example: &%Z07,0
Sets the print case to mono.
Notes: This default only affects LU3 printing.
1-8