Syslog Setup - Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
12
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
13
Send a test mail to confirm that e-mail messages can be sent to the e-mail addresses that
are set.
13-1
In [Action] on the [Network] screen, click [Setup E-Mail Notification].
The [Setup E-Mail Notification] screen appears.
13-2
Click the [Send Test E-Mail] button.
13-3
Check that the test mail is sent to the e-mail addresses that are set.
For details on the event code and message of the test mail, refer to "User's Guide -Operation-".
5.2.3

Syslog Setup

If an event occurs in the ETERNUS DX Disk storage system, logs for the event can be sent to the specified
syslog server (external server).
• Up to two syslog servers can be set.
• Make sure to check whether the syslog server receives logs correctly after the syslog notification
environment setup is complete.
• Logs are not sent again when a communication error occurs between the ETERNUS DX Disk storage
system and the syslog server.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
122
Copyright 2013 FUJITSU LIMITED
End of procedure
P3AM-4832-07ENZ0