Chapter 3 Rack Installation
3.2 Installing Controller Enclosure
3.2
Installing Controller Enclosure
This section describes how to install the controller enclosure in a rack.
CAUTION
Procedure
1
Attach the rack rails to the rack.
■ For the EMEA&I region
(1)
Attach the 2U rack rail to the left rear rack pillar.
The M5 centering screws should be inserted in the 1st and 6th holes above the base line of the
controller enclosure.
2U rack rail
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
Do Not
•
Do not uninstall the drives that are installed by default or move them to any
other slot.
Contact your sales representative or maintenance engineer if drives that are
installed by default need to be uninstalled or moved to another slot.
M5 centering screws (10mm)
52
Copyright 2013 FUJITSU LIMITED
P3AM-4832-07ENZ0