Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 93

Chapter 5 Setup
5.1 Basic Setup
Follow the procedure below to perform initial setup. For details on the settings, refer to "ETERNUS Web GUI
User's Guide".
Procedure
1
Click the [Next>>] button in the [Start Initial Setup] screen.
The [Set Storage System Name] screen appears.
2
Set the name of the ETERNUS DX Disk storage system.
Set the name of the ETERNUS DX Disk storage system.
The information that is set here is used for network management by SNMP. The name of the ETERNUS
DX Disk storage system is displayed in the login and operation screens of ETERNUS Web GUI.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
93
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0