Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 144

Chapter 5 Setup
5.5 System Status Check
■ RAID group check
On the [RAID Group Information] screen of ETERNUS Web GUI, the status of RAID groups that you have created
is displayed. Check if RAID configuration is set correctly.
To display the [RAID Group Information] screen, click the [RAID Group] tab on the navigation of the ETERNUS
Web GUI screen. In the [RAID Groups] screen that appears, select which RAID group to check the information
for and click the name or No. of this RAID group.
■ Volume check
On the [Volume Information] screen of ETERNUS Web GUI, the status of volumes that you have created is
displayed. Check if volumes are set correctly.
To display the [Volume Information] screen, click the [Volume] tab on the navigation of the ETERNUS Web GUI
screen. In the [Volumes] screen that appears, select which volume to check the information for and click the
name or No. of this volume.
After checking whether all of the preceding settings are correctly performed, setup of the ETERNUS DX Disk
storage system is complete.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
144
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0