Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 57

Chapter 3 Rack Installation
3.2 Installing Controller Enclosure
4
Attach the flange cover that is provided with the ETERNUS DX Disk storage system.
5
For regions other than EMEA&I, attach the brackets to the rack rails (for the left and right
sides).
Use the thumb screws to attach the brackets at the specified locations on the rear side.
Left
2.5" type
controller enclosure
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
Attachment location of the bracket
Right
3.5" type
3.5" type
controller enclosure
controller enclosure
57
Copyright 2013 FUJITSU LIMITED
2.5" type
controller enclosure
Bracket
Thumb screw
End of procedure
P3AM-4832-07ENZ0