Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 105

Chapter 5 Setup
5.1 Basic Setup
2
Select the drive that is to be registered as the Global Hot Spare and click "Assign Global HS"
in [Action].
A confirmation screen appears.
3
Click the [OK] button.
The Global Hot Spare is registered and the registration completion screen appears.
4
Click the [Done] button.
The screen display returns to the [Disks] screen.
■
Dedicated Hot Spare registration
The procedure to register a Dedicated Hot Spare is as follows:
CAUTION
Procedure
1
Click the [Component] tab on the navigation of the ETERNUS Web GUI screen. On the
[Component] screen, click "Disks" in [Category].
The [Disks] screen appears.
2
Select the drive that is to be registered as the Dedicated Hot Spare and click "Assign
Dedicated Hot Spare" in [Action].
The [Assign Dedicated Hot Spare] screen appears.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
Do
• When registering Dedicated Hot Spares, the drive size (2.5" or 3.5") and the
drive speed must be the same. In addition, the capacity of each hot spare
should be the same as or larger than the capacity of the drives in the RAID
group.
• A single Dedicated Hot Spare can only be registered to one RAID group. A
single Dedicated Hot Spare cannot be registered for multiple RAID groups.
105
Copyright 2013 FUJITSU LIMITED
End of procedure
P3AM-4832-07ENZ0