Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 95

Chapter 5 Setup
5.1 Basic Setup
3-2
Click the [OK] button.
The data and time is set and the setting completion screen appears.
3-3
Click the [Done] button.
The [Change Password] screen appears.
4
Change the password.
Change the initial account password.
4-1
Specify the required items and click the [Next>>] button.
A confirmation screen appears.
4-2
Click the [OK] button.
The password is changed and the change completion screen appears.
4-3
Click the [Done] button.
The [Register Thin Provisioning License] screen appears.
5
Register the Thin Provisioning Feature License.
When the Thin Provisioning Feature License is registered as a factory setting, proceed to
This screen is displayed when a Thin Provisioning Feature License is not registered.
To register the license, purchase the optional "Thin Provisioning Feature License". For details, refer to
"Feature activation licenses" that is provided with the Thin Provisioning Feature License.
■ To skip registration of the Thin Provisioning Feature License
(1)
Click the [Skip] button.
The [Register Copy License] screen appears.
■ To register the Thin Provisioning Feature License
(1)
Set the required items and click the [Set] button.
A confirmation screen appears.
(2)
Click the [OK] button.
The Thin Provisioning Feature License is registered and the setting completion screen appears.
(3)
Click the [Done] button.
The [Register Copy License] screen appears.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
95
Copyright 2013 FUJITSU LIMITED
Step 6.
P3AM-4832-07ENZ0