Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 108

Chapter 5 Setup
5.1 Basic Setup
6
Click the [Done] button.
The screen display returns to the [Host Group] screen.
■ For iSCSI host groups
Procedure
1
Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen.
2
In [Action], click "Add iSCSI Host Group".
The [Add iSCSI Host Group] screen appears.
3
Enter a host group name to be created, and select a host response to be assigned to the
host group.
4
Register an iSCSI host in a host group and click the [Add] button.
The following screen shot shows registration of a host by clicking the [Now Connected] tab.
A confirmation screen appears.
5
Click the [OK] button.
The iSCSI host group is added and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [Host Group] screen.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
108
Copyright 2013 FUJITSU LIMITED
End of procedure
End of procedure
P3AM-4832-07ENZ0