Operation
Configure device
This section contains information about how to configure the device and install the operating system.
Make sure that the power-saving functions in the BIOS Setup are disabled.
i
Configuration with ServerView Suite
These software applications make it easy for you to configure the device and then install the
operating system.
Information is provided in the "ServerView Suite" manual.
Configuration without ServerView Suite
►
First, configure the SATA RAID controller using the appropriate BIOS menu.
►
Insert the DVD of the operating system to be installed.
►
Restart the device.
►
Follow the instructions on the screen and in the manual for the operating system.
Configuring the SATA RAID controller
A SATA RAID controller, to which multiple SATA hard disk drives can be connected, is integrated on
the mainboard. RAID levels 0 and 10 are supported by SATA RAID software.
You can preconfigure the RAID controller in BIOS. Alternatively, you can configure the RAID
controller during the configuration process using ServerView Suite. Use of the supplied software is
recommended.
30
Fujitsu Technology Solutions