2.
CHECK CRANKSHAFT POSITION (CKP) SENSOR ELECTRICAL CONNECTOR
• Disconnect the Injector (1) electrical connector.
• Inspect the electrical connector for damage.
Is the electrical connector OK?
Yes
>>
Go to the next step.
No
>>
Repair or replace the electrical connector
as necessary.
3.
CHECK CRANKSHAFT POSITION (CKP) SENSOR REFERENCE VOLTAGE
• Turn ignition switch on.
• Check CKP sensor supply voltage between sensor
connector E-006, terminal 1 and ground, terminal 2
and ground in the sensor electrical connector.
• 3 V should exist.
Is the check result normal?
Yes
>>
Go to step 5.
No
>>
Go to the next step.
Chery Automobile Co., Ltd.
DIAGNOSIS & TESTING
03
VISMD030200
LTSMD030048
173
03–