Updating Previous Versions Of The Plug-And-Play Driver - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Updating Previous Versions of the Plug-and-Play Driver

March 2013
The Add/Remove Hardware Complete window appears and
informs you that the device was successfully removed.
7. Click Finish.
8. Follow Step 1 through Step 6 to remove each Dialogic®
Brooktrout® board that is listed as PCI Device (or possibly
Network Controller) in the Devices list in the Installed Devices
window.
Once the Plug-and-Play installation process is completed, verify that
the Computer Telephony category appears correctly in the Device
Manager and contains all installed Dialogic® Brooktrout® hardware.
See Verifying Dialogic® Brooktrout® Board Integration on page
After you update the driver, reboot your system to ensure that the
new driver is used.
Follow the steps to update the device driver:
1. Open the Windows Device Manager.
→
2. Select Start
Settings
Administrative Tools
3. Select the Device Manager node.
4. Expand the Computer Telephony node.
5. Right-click a Dialogic® Brooktrout® board and select Properties
to open the board properties window.
6. Select the Driver tab and look for the Update Driver button.
7. Click Update Driver to start the Update Driver Wizard.
8. Click Next.
9. After the Install Hardware Device Drivers window appears, select
Search for a suitable driver for my device.
10. The Locate Driver Files window appears, select Specify a location.
11. On the next window, choose Browse and locate the trxstream.inf
file located on the CD under the Windows Plug-and-Play folder,
or if you have already installed the Brooktrout SDK, locate the
file under [INSTALLDIR]\driver\winnt\pnp\.
If the specified location for the new trxstream.inf file is different
from the location for the old trxsteam.inf file, and if the file still
exists in the old location on your system, the update does not
Installing the Plug-and-Play Driver
→
Control Panel
→
Computer Management.
94.
→
97