Starting Dialogic® Brooktrout® Tecupdate - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Starting Dialogic® Brooktrout® TECUpdate
March 2013
The Dialogic® Brooktrout® TECUpdate utility is installed as a
separate software package. For more information:
See the chapter on packaging your application in the Dialogic®
Brooktrout® Fax Products SDK Developer Guide.
Contact your authorized Dialogic reseller or application partner.
Distribute the TECUpdate utility to your end users even if you do
not plan to distribute the Dialogic® Brooktrout® Configuration Tool,
so that your customers can update their systems as needed.
The TECUpdate utility assumes that the:
Firmware is downloaded to the board.
Dialogic® Brooktrout® driver is started.
You can run the TECUpdate utility from the file system (for example,
Windows Explorer), Start Menu or the command line:
File System:
[InstallDIR]\TECUpdate.exe
where: InstallDIR is the directory where you installed the
utility.
Start Menu:
→
Start All Programs
Upgrade Tool
Command Line:
C:\Brooktrout\Boston\bin\TECUpdate.exe
The TECUpdate utility queries and displays information for the
selected module. TECUpdate operates with Dialogic® Brooktrout®
drivers from Brooktrout SDK 2.1.0 and above.
Starting Dialogic® Brooktrout® TECUpdate
→ →
Brooktrout TECUpdate License
153