Selinux - Dialogic Brooktrout Digital Board Installation And Configuration Manual

SELinux

March 2013
SELinux prevents bostlib_mt.so and other Dialogic-supplied shared
libraries from loading because they require text relocation, which is
very common for third-party shared libraries.
Follow one of the methods below to allow shared libraries to load:
Disable SELinux as follows:
In /etc/selinux/config, set SELINUX to disabled and reboot.
Set the SELinux mode to permissive - which will still cause
warnings to pop up and appear in the logs, but the programs will
work.
In /etc/selinux/config, set SELINUX to permissive , and
reboot.
Allow the shared library to do text relocation. For each shared
library (.so) file that fails to load, run the following program:
chcon -t textrel_shlib_t <library name>
Special Considerations
50