Installing The Dialogic® Brooktrout® Sdk - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Installing the Dialogic® Brooktrout® SDK
March 2013
If you do not have the Dialogic® Brooktrout® Fax Products SDK,
contact your sales associate.
Also, although Dialogic recommends that you install the Brooktrout
SDK before you install your Computer Telephony, if you choose to
install the boards first, the Found New Hardware Wizard searches
for and launches the driver installation. If the Wizard cannot find
suitable drivers, it prompts you to browse and locate of the drivers.
Note: This installs the drivers but not the runtime components.
Dialogic recommends using the Dialogic® Brooktrout® Fax
Products SDK CD-ROM installation.
If you have Dialogic® Brooktrout® SR140 Software, you must install
the Dialogic® Brooktrout® SDK first. Then you can turn on
Dialogic® Brooktrout® SR140 Software using the Dialogic®
Brooktrout® License Manager. See the Dialogic® Brooktrout® Fax
Products Windows End User Guide.
Note: If you have a previous version of the Dialogic® Brooktrout®
SDK installed on your system, you must uninstall it before you
can successfully install the latest Dialogic® Brooktrout® SDK.
The InstallShield Wizard does not install the latest Dialogic®
Brooktrout® SDK if there is a previous version on your system;
however, it notifies you of the previous version and suggests
corrective action. See
page 81 for more information.
Installing the Dialogic® Brooktrout® SDK
Removing or Modifying the Software on
74