Dialogic Brooktrout Digital Board Installation And Configuration Manual page 125

March 2013
/f <cfgfile>
Specify the name and location of the user-defined
configuration file <cfgfile> while launching the Brooktrout
Configuration Tool. For example:
/f C:\Brooktrout\Boston\custom\btcall.cfg
/p
Show the Brooktrout Configuration Tool - Preferences dialog
box
/q
Do not display the Brooktrout Configuration Tool - Preferences
dialog box.
You can use any options in combination with a mode when launching
the Brooktrout Configuration Tool. When ran from any mode,
including the command line without a mode option switch, the
Brooktrout Configuration Tool starts in Wizard Mode, if the modules
are of the same type. Otherwise, the Brooktrout Configuration Tool
starts in Advanced Mode.
Running the Dialogic® Brooktrout® Configuration Tool
125