Checking The Installation; Defining Default Symbols - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Checking the Installation

Exit Code

Defining Default Symbols

DEFAULT_MOD_NUM
DEFAULTAPPBUFSIZE
Reserved
DEFAULTMACHINEID
DEFAULTMAXHWMOD
Reserved
DEFAULTPHYBUFSIZE
DHSIZEDEF
HIST_PHY_ADMIN_ONLY_DEF
MAX_RESERVED_MODULE_NUMS Maximum number of module reservations.
MAXAPPBUFSIZE
MAXMACHINEID
Reserved
MAXPHYBUFSIZE
MINAPPBUFSIZE
MINMACHINEID
MINPHYBUFSIZE
NUM_HISTS_APL_DEF
NUM_HISTS_PHY_DEF
March 2013
_mill_driver_install_check
0 = not installed
non-0 = installed
_mill_driver_defaults
Defines the symbols that provide defaults for use with variable
values.
Default starting reserved module number.
Default application buffer size.
Default ISA interrupt line. Reserved, no longer in
use.
Default machine ID.
Default maximum number of PCI/cPCI modules.
Default number of ISA modules. Reserved, no
longer in use.
Default physical buffer size.
Default history size.
Default for physical histories admin only.
Maximum application buffer size.
Maximum allowable machine ID.
Maximum number of ISA modules. Reserved, no
longer in use.
Maximum physical buffer size.
Minimum application buffer size.
Minimum allowable machine ID.
Minimum physical buffer size.
Default number of application histories.
Default number of physical histories.
Solaris Operating System
188