Installation Steps - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Installation Steps

March 2013
If you have a Dialogic® Brooktrout® SR140 license, you must install
the Dialogic® Brooktrout® SDK software first.
Then you can turn on SR140 Software by either of the following:
Use the interactive web method
Create a request for email or fax
See Activating Dialogic® Brooktrout®SR140 Fax Software in the
Dialogic® Brooktrout® Fax Products Linux End User Guide.
Follow the steps below to install the Dialogic® Brooktrout®
software on Linux:
When running driver installation programs, scripts, or functions,
you must be logged in as root or have administrative privileges.
Dialogic supports only the standard GNU C compiler that ships with
Linux.
1. Install the firmware, driver, and Bfv API software onto your
computer.
If you are reinstalling or upgrading software from a previous
Brooktrout SDK, you must first remove the previously installed
software before installing this software.
See
Removing the Software on page
2. Compile the sample applications and utilities (optional).
See the chapter on sample applications and utilities in the
Dialogic® Brooktrout® Fax Products SDK Developer Guide.
3. Run the dinstall program to manually configure the driver
(optional).
See Configuring the Driver Manually on page
4. Download the firmware, optionally configure the telephony
parameters, see:
Downloading Firmware on page 159
Using a Call Control Configuration File on page
Installation Steps
38.
39.
142).
35