Defining Default Symbols - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Defining Default Symbols

March 2013
_mill_driver_defaults
Defines the symbols that provide defaults for use with getting
parameter values.
DEFAULT_MOD_NUM
DEFAULTAPPBUFSIZE
Reserved
DEFAULTMACHINEID
DEFAULTMAXHWMOD
Reserved
DEFAULTPHYBUFSIZE
DHSIZEDEF
HIST_PHY_ADMIN_ONLY_DEF
MAX_RESERVED_MODULE_NUMS Maximum number of module
MAXAPPBUFSIZE
MAXMACHINEID
Reserved
MAXPHYBUFSIZE
MINAPPBUFSIZE
MINMACHINEID
MINPHYBUFSIZE
NUM_HISTS_APL_DEF
NUM_HISTS_PHY_DEF
Default starting reserved module
number.
Default application buffer size.
Default ISA interrupt line. Reserved,
no longer in use.
Default machine ID.
Default maximum number of PCI/cPCI
modules.
Default number of ISA modules.
Reserved, no longer in use.
Default physical buffer size.
Default history size.
Default for physical histories admin
only.
reservations.
Maximum application buffer size.
Maximum allowable machine ID.
Maximum number of ISA modules.
Reserved, no longer in use.
Maximum physical buffer size.
Minimum application buffer size.
Minimum allowable machine ID.
Minimum physical buffer size.
Default number of application
histories.
Default number of physical histories.
Linux Operating System
184