Driver File Locations (Install); Build Requirements For Install; Version Information - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Driver File Locations (install)

March 2013
When using install to configure the device driver, you do not need all
files from the distribution. However, the file locations used by the
configuration procedure relative to the directory where install is run
must be the same as that in the normal distribution.
Assuming a directory named install where install is being run, the
following files must be present:
install\install.exe
pnp\brooktrout.cat
pnp\trxstream.inf
pnp\TRxStream\x86\ (directory for the following 32-bit OS files)
boston.pdb
boston.sys
brktBdevco.dll
brktBdevpp.dll
pnp\TRxStream\x64\ (directory for the following 64-bit OS files)
boston.pdb
boston.sys
brktBdevco.dll
brktBdevpp.dll
These files and directories appear in the standard distribution under
the directory driver\winnt.

Build Requirements for install

You need the Windows 2000 DDK installed to compile the install.exe
application. For more information about the Microsoft Windows
Device Driver Kit, see microsoft.com. install.exe links to the DDK
libraries: setupapi.lib and newdev.lib. It also links to the shlwapi.lib
system library.

Version Information

The driver file, boston.sys, and the DLL library file, bostdlld.dll,
contain version resource information. Use the system File Manager
or Explorer to view this information.
Special Considerations
117