Telecommunications Compliance Statements; United States Of America; Equipment Approved After July 23, 2001; Ringer Equivalence Number (Ren) - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Telecommunications Compliance Statements

United States of America

March 2013
The following customer information must be provided to customers
with each unit of approved terminal equipment.
The statements provided below should be conspicuously located in
the end user system documentation:

Equipment Approved After July 23, 2001

This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the circuit side (bottom side)
of this equipment is a label that contains, among other information,
a product identifier in the format USAAAEQ##TXXXX. If requested,
this information must be provided to the telephone company.

Ringer Equivalence Number (REN)

The REN is used to determine the number of devices that might be
connected to a telephone line. Excessive RENs on a telephone line
can result in the devices not ringing in response to an incoming call.
In most but not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that can be connected to
a line, as determined by the total RENs, contact the local telephone
company.
For products approved after July 23, 2001, the REN for this product
is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 03 is a REN of 0.3). For earlier
products, the REN is separately shown on the label.
Telecommunications Compliance Statements
172