Preface; Introduction - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Introduction

March 2013
The Dialogic® Brooktrout® Fax Products SDK Installation and
Configuration Guide explains how to install the software (firmware,
Dialogic® Brooktrout® Bfv APIs, and driver for the Dialogic®
Brooktrout® TR1034/SR140/TruFax® products) on your host
system. It also describes how to configure the driver, configure call
control, and download the firmware to a Brooktrout module.
Chapter 1 provides a quick start for users experienced with API
programming in general and the Dialogic® Brooktrout® Bfv
APIs in particular.
Chapter 2 explains how to install the Dialogic® Brooktrout®
software and the device driver on a Red Hat Linux operating
system.
Chapter 3 explains how to install the Dialogic® Brooktrout®
software and the device driver on the Solaris operating system.
Chapter 4 explains how to install the Dialogic® Brooktrout®
software on a Windows operating system.
Chapter 5 describes how to install the Dialogic® Brooktrout®
device driver on Windows operating systems.
Chapter 6 describes how to configure your software and
hardware on Windows systems.
Chapter 7 lists the directories where files are installed.
Chapter 8 describes how to use the Dialogic® Brooktrout®
TECUpdate Utility.

Preface

17