Identifying The Model Of The Board - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Identifying the Model of the Board

March 2013
When you launch the Brooktrout Configuration Tool and it is
unable to automatically identify the board:
1. The Brooktrout Configuration Tool displays a dialog box similar
to the following.
2. Choose an Interface Type and highlight the board model, then
click OK.
3. If the Brooktrout Configuration Tool is not able to detect the
board, then it launches the tool in Advanced Mode even if you
included the /w parameter on the command line.
Running the Dialogic® Brooktrout® Configuration Tool
131