Compiler Issues; Driver File Locations - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Compiler Issues

Driver File Locations

March 2013
This version of the Bfv API was compiled with version 4.2 or later of
the Sun C compiler (Sun Workshop C/C++ 4.2). Object files and
libraries compiled with these versions of the C compiler might be
incompatible with those compiled with earlier versions.
To ensure proper functioning of your applications when using an
older version of the C compiler, Dialogic recommends that you
contact Dialogic Technical Services and Support for the source
version of the Bfv API and compile the Bfv API library using the
older compiler.
After installing your Sun C compiler, be sure that your paths are set
up correctly before you begin working with the Dialogic®
Brooktrout® software. Failure to do so could cause accidental use of
incorrect default compiler components resulting in many errors.
When using dinstall to configure the device driver, you need not
have all files from the distribution. However, the locations of files
used by the installation procedure relative to the directory from
which dinstall is being run must be the same as that in the normal
distribution.
Assuming a directory named install from which dinstall is being run,
the following files must be present:
install/dinstall
install/dinstlib
kernel/27/boston32
kernel/27/boston64 (SPARC only)
kernel/bostunld
These files and directories appear in the standard distribution under
the directory driver/solaris.
Special Considerations
69