Dialogic Brooktrout Digital Board Installation And Configuration Manual page 91

March 2013
7. The Hardware Co-Installer checks if the Dialogic® Brooktrout®
Software is installed on your system.
a. Click Next to install the Dialogic® Brooktrout® Software.
If you do not have Dialogic® Brooktrout® Software installed,
before the Completing the Found New Hardware Wizard window
appears, the Computer Telephony dialog box provides these
options:
Click Yes to install the Dialogic® Brooktrout® Software.
Click No to install the Dialogic® Brooktrout® Software later.
Follow the directions on the Install Path dialog box, then click
OK to install the software.
After installing the Plug and Play driver on a Windows 2012
Note:
system, click the small flag in lower right hand corner to open
Action Center. The following dialog box appears:
Click Finish installing device software.
Installing the Plug-and-Play Driver
91