Process Priority; Command Line Configuration For Install - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Process Priority

Command Line Configuration for Install

March 2013
The Bfv API automatically raises the priority of any process that
calls BfvLineAttach to HIGH_PRIORITY_CLASS. Dialogic
recommends using this priority to keep delays to application
processes performing fax or speech functions to a minimum. Priority
raising occurs the first time the application calls BfvLineAttach
only, and is controlled by the global variable _mill_priority,
which contains the new priority for the process.
When configuring the device driver using install or removing it using
install -r, you can specify the command line option -c to cause the
install program to not prompt you for any parameters. Instead, the
install program uses the responses that you supply following the -c
option on the command line.
If you use the -c option, you must include all the parameters
described below, in order, regardless of whether or not the
parameter has meaning on the system in question. If a parameter
does not apply, it is ignored. The parameters are not checked for
validity.
The software does not prompt for removal of old driver
Note:
versions.
When configuring the driver using install, you must include the
following parameters:
Parameter
Reserved
Reserved
Reserved
Max num PCI hardware modules
Physical buffer size
Application buffer size
Reserved
Machine ID
Reset option (1 or 0)
History Enable
Special Considerations
Defaults
p
0
-1
16
32768
10240
0
1
1
0
114