Starting Bostsrv; Troubleshooting Bostsrv; System Error 59 - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Starting Bostsrv

Troubleshooting Bostsrv

March 2013
2. Enter name and location of the btcall configuration file. (default
shown)
C:\Brooktrout\Boston\bfv.api\winnt\bin\btcall.cfg
3. Enter the location of the firmware files. (default shown)
C:\Brooktrout\Boston\fw
4. Enter the following at the a command prompt:
net start bostservice
The Brooktrout Technology Boston Host Service is
starting...
Follow the steps below to start the Boston Host Service, in
a Command Prompt window:
Enter the following at the a command prompt:
net start bostservice
The Brooktrout Technology Boston Host Service is
starting...
To set the Boston Host Service to start automatically, set startup
mode to Automatic using Windows Services window. This initializes
the Dialogic® Brooktrout® modules upon machine starter reboot.
You can also perform this step through the Options,
Preferences....Boston Host Service in Start Mode in the Brooktrout
Configuration Tool.

System Error 59

When the Boston Host Service fails to start as a service with a
system error 59, verify that you correctly entered the configuration
file name and path location, as shown in
page 108 for the btcall.cfg file.
If you do not specify the full path to the protocol for the callctrl.cfg
file, within the btcall.cfg file, a system error 59 can also occur.
Using the Boston Host Service
Installing Bostsrv on
109