Introducing The Driver Reinitialization Utility; Using The Driver_Reinit Utility - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Introducing the Driver Reinitialization Utility

Using the driver_reinit Utility

March 2013
The driver can be reinitialized close to its starting state in terms of
channels assigned to modules and module number assignments
using the driver_reinit program located in the
boston/driver/<platform>/user directory.
Use of this program may avoid the need to stop and restart the
driver. This is especially useful for a Windows PnP system as the
driver cannot be easily started and stopped.
When you execute the driver_reinit program, this utility will return
the driver to a state as close as possible to that of a fresh driver start
without stopping the driver.
The utility will:
Clear all ordinal channel assignments
Remove all stored information about the modules
Reset all the hardware modules
The utility fails if any application sessions currently exist.
Introducing the Driver Reinitialization Utility
197