Removing Or Modifying The Software - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Removing or Modifying the Software

Add/Remove Program
March 2013
After you install the Brooktrout SDK, you can modify, repair, or
remove it by running sdk_windows.exe again. Modifying or removing
the Brooktrout SDK means reinstalling the software to add or delete
functionality.
You can also remove or change the Brooktrout SDK or a previous
version of the Brooktrout SDK by using Add/Remove Programs from
the Control Panel.
Follow the steps below to uninstall or modify the existing
software from the Control Panel:
1. Click either the following:
My Computer → Control Panel → Add/Remove Programs
Start → Settings → Control Panel → Add/Remove Programs
For Windows Server 2008:
Start → Settings → Control Panel →Programs and Features.
The Add/Remove Programs window appears.
Note: On Windows Server 2003 x64 and Windows Server 2008 x64,
if installed also remove the Dialogic Brooktrout x64
components. Refer to
2. Select Dialogic Brooktrout Boston SDK from the program list.
If you click Remove, the system asks you if you want to remove
the software in the Add/Remove Programs dialog box.
3. Click Yes.
4. If you click Change in the Add/Remove Program window, the
window appears.
Welcome
Removing or Modifying the Software
Brooktrout_x64 on page 83
81