Solaris Operating System; Solaris Installation - Dialogic Brooktrout Digital Board Installation And Configuration Manual

Solaris Operating System

Solaris Installation

Required Input Variables
Reserved
Reserved
Reserved
max_pci_hw_modules
physbufsize
appbufsize
machine_id
do_reset
history_enable
dhsize
March 2013
You can perform configuration from a custom installation program
by writing a program that runs dinstall with the -c option, or by
writing a Bourne shell script that calls the provided installation
functions described below.
Only write custom installation programs using one of these two
mechanisms. Do not write them by directly including and/or
modifying any of the supplied source or by writing new code to
perform the same underlying system actions. Compatibility with
installation functions for later versions cannot be guaranteed, but
the up-to-date usage of the functions will always be documented.
The Bourne shell script containing the installation functions is
dinstlib, located in boston/driver/solaris/install. The dinstall is a
particular example of a shell script that makes use of dinstlib.
The functions generally use shell variables to pass values in and out.
An exhaustive description of these variables is not supplied here.
Use the Solaris driver installation and the dinstall script as guides
(see Installing the Software on page 56
Manually on page 60).
mill_driver_install
0
0
0
Maximum number of PCI/cPCI hardware modules
Physical buffer size.
Application buffer size.
Machine ID, in hex (no leading 0x).
Reset on driver startup.
Whether to enable history.
History size.
Solaris Operating System
and Configuring the Driver
186