Dialogic Brooktrout Digital Board Installation And Configuration Manual page 199

Logical channel number
Millennium Address
Module
NVRAM
Ordinal channel number
Packet
PCI
PDF
Plug-and-Play
Port
Stream
T1/E1 span
TCP
March 2013
A number used with the hardware module number to reference a
channel in a system. Channel 0 is reserved and channel 1 is the
administrative channel. Other channels are numbered from
2 to n+1 (where n is the number of work channels defined for the
module).
An address of a communicating BOSTON or Millennium entity, a
facility and channel on a BOSTON module, or the driver. Each
address consists of 4 components, the facility, the channel, the
module, and the machine. It is possible to make use of most features
of the firmware and the APIs without requiring direct use of these
addresses.
A communicating Boston entity that usually represents a CPU on a
Dialogic® Brooktrout® board, a host application, a software
telephony module (SR140) or the driver. See
Module Number on page 26
module number assignment.
Non-Volatile RAM. Random Access Memory that is not erased when
the board is powered off or when the firmware is downloaded again.
A number in the range 0 to n-1 where n is the total number of work
channels on all the boards in the system.
In the BOSTON architecture, a sequence of bytes containing a
BOSTON destination address, source address, and one or more
commands.
Peripheral Component Interconnect
Portable Document Format
Hardware or software that, after installation, can be used
immediately without configuration. Also PnP.
A TDM bus (for example: MVIP, H110), DS-1 (T1/E1), BRI or analog
interface.
A logical data entity that corresponds to a physical data line on a
TDM bus
The set of slots that comprises one T1 (24) or one E1 (30) line. The
spans are numbered starting at 1.
Transmission Control Protocol
Determining the Board
for more information about modules and
199