Output Mode for Machine without Finisher
This section describes the output modes for the copier without a Finisher.
The Stack mode is initially selected.
1 Stack mode copies the original set in amounts determined by the print quantity
setting, then outputs sorted sets normally.
2 E-SORT + sort mode rotates every other set by 90° upon exit, provided the same paper
size is loaded in two trays, one tray with paper loaded in portrait orientation and the other
tray with paper loaded in landscape orientation, e.g., A4 and A4R.
3 Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
4 E-SORT + group mode rotates every other grouped set by 90° upon exit, provided the
same paper size is loaded in two trays, one tray with paper loaded in portrait orientation
and the other tray with paper loaded in landscape orientation, e.g., A4 and A4R.
Stack (default)
>>>Specification for Output Modes without Finisher<<<
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet, OHP,
Image Insert, Repeat, AUTO Layout, Non-Image Area Erase, Stamp (Numbering)
❒ Incompatible with E-SORT + sort mode: Sheet/Cover Insertion, Booklet, OHP, Spe-
cial Original (Mixed Original), Repeat, AUTO Layout, Non-Image Area Erase
❒ Incompatible with E-SORT + group mode: Using platen glass (unless Dual Page,
Frame/Fold Erasure, or Platen store mode with Chapter, Flip Side 2, Image Shift, or
Stamp (excluding Numbering) is used), Proof Copy, Sheet/Cover Insertion, Booklet,
OHP, Image Insert, Special Original (Mixed Original), Repeat, AUTO Layout, Non-
Image Area Erase, Stamp (Numbering)
1.
When using E-SORT + sort or E-SORT + group mode, load the same
paper size into two trays in different orientation.
Stack mode is initially selected. Key Operator can change the initial output
mode. See p. 11-12.
Originals
3
2
1
E-SORT + sort
HINT
Example:
3-set copies
Group
E-SORT + group
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-29
Need help?
Do you have a question about the 7022 and is the answer not in the manual?
Questions and answers