Environment - Konica Minolta 7022 Instruction Manual

Environment

CAUTION: Prevention of Fire
Do not install near flammable materials, curtains or
volatile combustibles, that can catch or cause fire.
CAUTION: Prevention of Short Circuit
Do not install the copier where it could be splashed
with rain water or water from a tap, to avoid a short
circuit.
CAUTION: Temperature and Humidity
• Keep away from direct sunlight, heat sources such
as stoves, cool air from an air conditioner and hot
air from a heater.
• Avoid any environment that is outside the range
shown below:
10 to 30°C in temperature
10 to 80% in humidity
CAUTION: Ventilation
• Install the machine in a well-ventilated place.
• Keep away from dust or corrosive gases. These materials may cause poor image quality.
• During use, the machine generates ozone in an insufficient amount to cause any
hazard to the human body.
However, if the machine is used in a poorly ventilated room and many copies are
made or more than one copier is used at the same time, an odor may be detected.
Ensure adequate ventilation for a comfortable working environment.
CAUTION: Vibration
Do not install on a floor which is subject to vibration or is
not level.
CAUTION: Transportation
Be sure to contact your service representative when
moving or transporting the machine. If you move the
machine, trouble may be caused by vibration.
Requirements for Safe Use (continued)
1
Safety
Information
1-5