Electronic Key Counter) - Konica Minolta 7022 Instruction Manual

[4] E.K.C. (Electronic Key Counter)
This function can only be accessed by the Key Operator after a 8-digit EKC master key
code is entered. The Electronic Key Counter allows you to monitor all copying activity
by controlling EKC password accounts.
This feature can track copier usage for individual users and/or accounts as well as limit
access to the copier to authorized users. Copy quantity limits for specific accounts can
also be set. Use the EKC Key Operator Form provided at the end of this section to
record EKC password information.
The EKC stores up to 128 EKC passwords, each of which represents a separate
account that can be used for billing and recordkeeping. The number of users assigned
to each account may depend upon the billing system in operation and the number of
individuals and departments using the copier. When the EKC is activated, copying can
be performed only after a valid EKC password is entered.
Copy quantity and copy limit for each account can be visually confirmed on the screen.
If EKC needs to be activated on your machine, contact your service representative.
The following EKC settings can be made:
1. Change E.K.C. Data:
Create up to 128 individual EKC passwords, 00000~99999, and limit copy counts for
each password to a max. 999,999 copies.
2. E.K.C. Data List:
Display the copy count for each EKC password, and change limit settings.
3. All Counter Reset:
Clear the copy count for all passwords.
4. EKC On/Off Setting:
Select the function to be on or off. The initial setting is Off.
5. Copy Limit Reached Effect:
Set the machine condition when the copy limit is reached. The machine can be set to
stop immediately or after a job is completed, or to only display a warning message.
11-18