Output Mode For Machine Without Finisher - Konica Minolta 7065 Instruction Manual

Section 6 : Basic Operations

Output Mode for Machine without Finisher

This section describes three output modes for a copier without the Finisher. For the copier
with Finisher installed, refer to Section 7: Output Modes.
q Sort with normal exit (default)
w Sort with alternate exit
e Group with normal exit
Specifications of Sort with Alternate Exit
Not available for the copier with Finisher
A4, A4R, B5 and B5R, or 8.5"x11" and 8.5"x11"R paper should be loaded in any tray
including Multi-sheet bypass tray.
Use RADF, or operate Memory copy to use platen glass.
Incompatible Basic Copying Conditions: ATS, Tandem mode
Incompatible Original Scanning Conditions: Resolution (Very high), Mixed Original
Incompatible Applications: Sheet/Cover insertion, Chapter, Combination, Booklet, OHP
interleave, Image insert, Dual page, Program job, Non-Image area erase, Repeat image,
AUTO layout, Thin/Thick paper, Overlay
Sort with normal exit (default)
OUTPUT
STAPLE SORT
SORT
6 - 30
Originals
3 2 1
Sort with alternate exit
OUTPUT
STAPLE SORT
SORT
Copy paper:
A4 and A4R, B5 and B5R
8.5"x11" and 8.5"x11"R
Group with normal exit
OUTPUT
STAPLE SORT
SORT
Touch on Output
GROUP
Mode Screen