Output Mode For Machine Without Finisher - Konica Minolta BIZHUB PRO C500 User Manual

Output Mode for Machine without Finisher

Output Mode for Machine without Finisher

This section describes the output modes for a copier without the Finisher.
The Non-sort mode is initially selected.
1 Non-sort mode copies the original set in amounts determined by the print
quantity setting, then outputs sorted sets normally.
2 Rotation sort mode rotates every other sorted sets by 90° upon exit,
provided the same paper size is loaded in two trays, one tray with paper
loaded in portrait orientation and the other tray with paper loaded in
landscape orientation, e.g., A4 and A4R.
3 Group mode copies each original page in amounts determined by the print
quantity setting, then outputs grouped sets normally.
4 Rotation group mode rotates every other grouped set by 90° upon exit,
provided the same paper size is loaded in two trays, one tray with paper
loaded in portrait orientation and the other tray with paper loaded in
landscape orientation, e.g., A4 and A4R.
Using Face up mode in combination with the above four modes, simplex copies
exit face up on the exit tray.
Face down
non-sort (default)
Face up
non-sort
3-46
Originals
Face down Face down
rotation sort
Face up
rotation sort
Example:
3-set copies
Face down
group rotation group
Face up Face up
group rotation group