Using Platen Glass - Konica Minolta 7022 Instruction Manual

Making Double-Sided Copies (1

Using Platen Glass

Use the platen glass to scan originals unsuitable for the document feeder.
>>>Specification for Double-Sided Copying Using Platen Glass<<<
❒ Use the Platen store mode.
❒ See p. 9-6 for the information on unsuitable RADF originals.
❒ Incompatible Conditions: Using RADF, OHP, Image Insert, Special Original (Non-
Standard Size)
1.
Open the document feeder.
The RADF indication on the Basic Screen will disappear and the 1
will be dimmed to show inactivity.
2.
Position original FACE DOWN on the platen glass.
Be sure to start from the first page.
See p. 3-5 for details on positioning originals.
3.
Touch 1 2 on the Basic Screen to highlight it.
a
DO NOT press [AUTO RESET] at this point, otherwise the selected mode
will be released and the copier cannot scan the original placed on the glass.
4.
Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange settings so that they are compatible with the
selected copy mode.
5.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
6.
Touch SCAN on the Basic Screen.
The front side image of the double-sided copy will be scanned into memory.
HINTS
Reminder!
DETAILS
HINT
2 , 2 2 ) (continued)
a a
2 and 2
a
3
C opying
Operations
2 keys
a
Positioning
Originals
Setting Print
Quantity
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-19