To Specify Desired Paper Size (Ams) - Konica Minolta 7022 Instruction Manual

To Specify Desired Paper Size (AMS)

When a paper size is specified on the touch screen, an appropriate reduction or
enlargement ratio will be selected automatically according to the original size detected
from the RADF or the platen glass.
• See the table on the following page for the relation of original size, copy
• Wide paper size can be specified when AMS is in use.
• To copy in 1.00 (100%) magnification mode and specifying a paper size,
1.
Touch a tray key on the Basic Screen to select the desired paper size.
The selected tray key will be highlighted, and under LENS MODE, -A- will also be
highlighted.
2.
Select additional copy conditions, as desired.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
4.
Position original(s).
• See p. 9-6 to p. 9-8 for original sizes detectable from the RADF or on the
• See p. 3-2 to p. 3-6 for details on positioning originals.
5.
Press [START].
The scanned image will be printed on the specified paper size using an automatically
selected magnification ratio.
Copy result may not be satisfactory due to the Rotation function. In this
case, turn the function OFF manually. See. p. 7-4.
3-10
HINTS
paper size, and magnification ratio.
In this case, the same magnification ratio as that of the standard size will
be selected automatically.
see p. 3-12.
HINT
HINTS
platen glass.
DETAILS
Selecting Paper Size (continued)