Erasing Outside Of The Original (Non-Image Area Erase); E Rasing Outside Of The Original (Non-Image Area Erase) - Konica Minolta 7022 Instruction Manual

Erasing Outside of the Original (Non-Image Area Erase)

The Non-image area erase mode is used to copy non standard or special originals, such
as books, magazines, paste-ups, graphs, thick or thin materials, etc. from the platen glass.
The exposed glass area outside the borders of the original will not be copied.
>>>Specifications for Non-Image Area Erase<<<
❒ Use the platen glass only. Keep RADF open throughout the procedure.
❒ Incompatible Conditions: Using RADF, 2
SORT+sort, E-SORT+group, Sheet/Cover Insertion, Chapter, Combination, Booklet,
Image Insert, Special Original (Mixed Original, Folded Original, Non-Standard Size,
Flip Side 2), Reverse Image, Image Shift, Stamp, Overlay
Set original
1.
Press [APPLICATION] on the control panel.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Non-Image Area Erase on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
8-56
General copying
HELP
CHECK
APPLICATION
OUTPUT
AUTO RESET
Reminder!
2 , 2 1 , APS, Sort, Staple, Group, E-
a a
Non-Image Area Erase
DATA
FAX
1 2 3
INTERRU
4 5 6
7 8 9
0
STAR
CLEAR QTY.