On The Platen Glass - Konica Minolta 7022 Instruction Manual

Output Mode for Machine with Inner Tray IT-101 (continued)
2.
Press [OUTPUT] on the control panel.
The Output Mode popup menu will be displayed.
3.
Select the desired output mode.
Touch the desired output mode key to highlight it.
To select Stack mode, deselect all the keys.
4.
Touch OK.
The Basic Screen will be restored.
5.
Select additional copy conditions, as desired.
6.
Enter the desired print quantity from the control panel keypad.
• See p. 9-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
7.
Position original(s) FACE UP in the document feeder or FACE DOWN

on the platen glass.

See p. 3-2 to p. 3-6 for details on positioning originals.
8.
Press [START].
Press [STOP/CLEAR] to suspend the scanning or printing job.
When the inner tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
DATA
HELP
1
CHECK
4
APPLICATION
7
OUTPUT
AUTO RESET
HINTS
HINT
CAUTION
FAX
2 3
INTERRU
5 6
8 9
0
STAR
CLEAR QTY.
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-35